Child pages
  • DataDelivery WS

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Code Block
languagexml
<ws:dataDeliveryRequest dateFrom="2015-07-01" dateTo="2015-07-01"
    xmlns="http://geomodel.eu/schema/data/request"
    xmlns:ws="http://geomodel.eu/schema/ws/data"
    xmlns:geo="http://geomodel.eu/schema/common/geo"
    xmlns:pv="http://geomodel.eu/schema/common/pv"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     
    <site id="site_1" name="Test site" lat="48.61259" lng="20.827079">
        <geo:terrain elevation="111" azimuth="112" tilt="11"/> <!--azimuth and tilt of terrain has only effect to PVOUT in case of GeometryFixedOneAngle geometry-->
        <geo:horizon>0:31.6 123:29.6 123.5:28 192.5:23.6 193:23.4 206.5:23.2 207:28.4 359.5:25.4</geo:horizon> <!--colon deliterdelimited pairs of sun azimuth vs. sun elevation, in degrees-->
        <!-- value of the horizon element is obtainable/viewable from/in pvPlanner application - horizon editor widget -->
        <pv:geometry xsi:type="pv:GeometryFixedOneAngle" azimuth="165" tilt="22"/>
        <!-- one axis horizontal tracker: <pv:geometry xsi:type="pv:GeometryOneAxisHorizontalNS" rotationLimitEast="-90" rotationLimitWest="90" backTracking="true"/>-->
        <!-- one axis inclined tracker: <pv:geometry xsi:type="pv:GeometryOneAxisInclinedNS" axisTilt="30" rotationLimitEast="-90" rotationLimitWest="90" backTracking="false"/>-->
        <!-- one vertical axis tracker: <pv:geometry xsi:type="pv:GeometryOneAxisVertical" tilt="25" rotationLimitEast="-180" rotationLimitWest="180" backTracking="true"/>-->
        <!--     vertical axis rotation limits are defined relative to 0 deg. (initial tracker position) from -180 to 180 deg with -90 deg.=east and +90 deg.=west, regardless of hemisphere-->
        <!-- two axis tracker: <pv:geometry xsi:type="pv:GeometryTwoAxisAstronomical" rotationLimitEast="-180" rotationLimitWest="180" tiltLimitMin="10" tiltLimitMax="60" backTracking="true"/>-->
        <pv:system installedPower="1000" installationType="FREE_STANDING" selfShading="false" dateStartup="2011-06-01">
        <!--switch on selfShading attribute and switch off back-tracking to determine the impact (losses) due to inter-row shading on PVOUT -->
            <pv:module type="CSI">
                <pv:degradation>3</pv:degradation>
                <pv:degradationFirstYear>8</pv:degradationFirstYear>
                <pv:surfaceReflectance>0.16</pv:surfaceReflectance>
                <!--<pv:powerTolerance low="10" high="90"/>-->
                <pv:nominalOperatingCellTemp>15</pv:nominalOperatingCellTemp>
                <!--<pv:openCircuitVoltageCoeff>7</pv:openCircuitVoltageCoeff> not supported
                <pv:shortCircuitCurrentCoeff>4</pv:shortCircuitCurrentCoeff> not supported-->
                <pv:PmaxCoeff>10</pv:PmaxCoeff>
            </pv:module>
            <!--<pv:inverter count="2" interconnection="PARALLEL"> not supported-->
            <pv:inverter>
            	 <pv:startPower>10</pv:startPower>
                <pv:efficiency xsi:type="pv:EfficiencyConstant" percent="94"/>
                <!--<pv:efficiency xsi:type="pv:EfficiencyCurve" dataPairs="0:20 50:60 100:80 150:90 233:97.5 350:97 466:96.5 583:96 700:95.5 750:93.33 800:87.5 850:82.35 900:77.8 950:73.7"/>-->
                <!--by using efficiency curve, we can model also clipping losses - having efficiency above certain power limit declining -->
                <pv:limitationACPower>900</pv:limitationACPower>  <!-- clipping can be defined here or via eff. curve -->
                <!--<pv:nominalDCPower>8</pv:nominalDCPower> not supported-->
            </pv:inverter>
            <pv:losses>
            	 <!--for dcLosses enter either monthlySnowPollution 12 monthly % numbers or snowPollution as one % number-->
                <pv:dcLosses cables="1.2" mismatch="0.65" snowPollution="2.5" monthlySnowPollution="5 5.2 3 1 1 1 1 1 1 1 2 4"/>
                <pv:acLosses cables="1" transformer="2.1"/>
            </pv:losses>
            <pv:topology xsi:type="pv:TopologyRow" relativeSpacing="2.5" type="UNPROPORTIONAL1"/>
            <!-- for trackers use column spacing: <pv:topology xsi:type="pv:TopologyColumn" relativeSpacing="2.5" type="UNPROPORTIONAL2"/>-->
            <!--with vertical axis tracker and two-axis trackers, it is assumed constructions equally distributed in both directions, so TopologyColumn is enough to define spacing-->
        </pv:system>
    </site>
     
    <processing key="GHI GTI TEMP PVOUT" summarization="DAILY" terrainShading="true">
        <timestampType>CENTER</timestampType>
    </processing>
     
</ws:dataDeliveryRequest>

...