Child pages
  • Solargis API User Guide
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 32 Next »

Overview of SolarGIS API

The aim of SolarGIS API is to provide programmatic access to SolarGIS database and procedures (e.g. PV simulation, satellite modeling results, etc.) for computers over the web. API is a "user interface" for developers. Developers can automate requesting and receiving SolarGIS products by using standard web protocols as  FTP or HTTP and smoothly integrate the results into their processing chain (monitoring, forecasting, comparisons, validation, calibration, yield assessment). 


SolarGIS API endpoint
Available dataTechnical information
Historic dataOperational dataForecast dataLong-term average dataWeb protocolCommunicationContent type
FTP API(tick)(tick)(error)FTP


CSV (request and response)
WS API Time Series(tick)(tick)(error)HTTP (SOAP or REST-like)synchronousXML (request and response)
WS API Long-term Averages(error)(error)(error)(tick)HTTP (SOAP or REST-like)synchronousXML (request and response)

SolarGIS API consists of three endpoints with slightly different capabilities:

  • SolarGIS FTP API - The service can deliver regularly updated PV simulation, solar radiation and meteo. data to FTP sites. This service provides most comprehensive set of input parameters. Request processing is asynchronous (client registers a request, server handles the request later, client checks  for the response) and can be done regularly (e.g. once per day, per month) or occasionally. Both request and response are CSV delimited text files, thus they can easily be automated and processed in batch mode. In case of FTP API, every single day the user is updated by operational data for yesterday. After the calendar month is fully completed, user is shipped with the same data again, because not all inputs are fully ready at the time of the daily update. This process is called re-analysis. There can be a minor difference between operational and re-analysed (archive) data. Available amount of requested data is related to available period of the particular data source. Please refer to the map of coverage. For pricing and setting up FTP user account, please contact us.
  • SolarGIS WS API Time Series - This standard Web service is aimed for quickly serving operational and forecast data (PV simulation, solar radiation and meteorological data) in synchronous manner (client waits for server to finish response). Typical usage for the service is performance monitoring, forecasting, comparisons of recorded vs. simulated PV data, asset management. Due to performance reason the amount of data within one request is currently limited to period of max. 31 days regardless to time resolution (the same rule applies for hourly or 15-minute time step). Both request and response are XML documents.  WS API request parameters (represented as XML elements and attributes) are formally described by XML Schema Definition documents (XSD). By using  XML schema document, each piece of XML document can be verified programmatically. For this service we provide two endpoint variants, classical SOAP or more light REST-like access. Look for more technical information hereForecast data are available in the same way as with the FTP API. Authentication and billing is based on API key registered with the user. Please contact us to discuss your specific requirements, and we will prepare a customized quotation for you.
  • SolarGIS WS API Long-term Averages - Standard XML-based Web service provides long-term averaged PV simulation, solar radiation and meteo. data with global coverage. Suitable for prospection and feasibility. The service imitates the click on Calculate button in SolarGIS pvPlanner application. The request and response for the service is not covered in this user guide. Technical information can be found here.

 Historic archived data is available according to regions showed in orange color on the coverage map below. For other regions use climData online shop. 

Spatial and Temporal Coverage of SolarGIS API

 Historical and Operational PV and Solar Radiation Data

Locations within orange regions are capable to be automatically updated (typically daily) in case of FTP API. Periods when data is available for are depicted on the map image above. For the North, Central and for part of South America data is available as full-time series since 1999 (GOES-EAST satellite data, NOAA). For east China, for Korea, Japan and Australia there are full-time series since July 2007 (MTSAT satellite data, JMA) available. For south of Africa and Europe (MSG satellite data, EUMETSAT) available period starts on 2010. We gradually expands these zones. The same regions are available for WS API Time Series. For the gray regions on the map use climData online shop. Meteorological data from numerical weather model are available globally within its temporal range (for more information go here). 

Forecast of PV, Solar Radiation and Meteorological Data


  • Yellow regions: GFS model from NOAA, USA is available globally with forecasting up to 7 days ahead (today + 7 days = 8 days affected in total). Frequency of the update is once in 12 hours.
  • Violet regions: more advanced IFS model from ECMWF, UK. Frequency of the update is once in 12 hours, forecasting today + 3 days ahead (4 days in total). The rest of days (up to 7 ahead) is filled by GFS model. 

Forecast is based on SolarGIS post-processing of outputs from numerical weather models. The forecast time series include the following PV, solar radiation and meteorological data in hourly step:

  • Global horizontal irradiance, GHI [W/m2]
  • Global tilted irradiance, GTI [W/m2]
  • Air temperature at 2 m, TEMP [°C]
  • PV electricity output, PVOUT [kWh]

Find more information about forecast here.

Request Parameters

Most detailed set of parameters comes with FTP API. Only a subset of the parameters is exposed via WS API Time Series. Following list of parameters is created with regard to FTP API (its CSV request). The last column shows the parameter availability in WS API Time Series. There we use standard XPath notation to describe parameter location within XML request. More information about XML schema used in WS API Time Series can be found here.

Location and Solar Resource Related Parameters

Parameter name in FTP APIRequiredValue typeValue unitDefault valueValue RangeDescriptionWS API Time Series equivalent (XPath)



floatdegree -90, 90Latitude/dataDeliveryRequest/site/@lat
lngYesfloatdegree -180, 180Longitude/dataDeliveryRequest/site/@lat
altYesfloatmeters -500, 8848Altitude above sea level/dataDeliveryRequest/site/terrain/@elevation
groundAlbedoNofloat-0.120, 1

Estimated annual value of reflection coefficient expressing amount of ground-reflected radiation, value ranges from zero (no reflection, black surface) to 1 (perfect reflection)

  • FixedOneAngle
  • OneAxisVertical
  • OneAxisInclined
  • OneAxisHorizontalNS
  • OneAxisHorizontalEW
  • TwoAxisAstronomical

Type of surface absorbing solar energy. It can be fixed or sun-tracking. It is assumed this typically is a PV module mounted on some construction.







  • fixed surface described by azimuth and tilt
  • single vertical axis tracking
  • tracks sun azimuth
  • tilted surface
  • rotation limits possible
  • back-tracking possible
  • relative column spacing
  • self-shading calculation not implemented
  • single inclined axis tracking
  • tracks sun azimuth
  • tilted surface
  • rotation limits possible
  • back-tracking possible
  • relative column spacing
  • self-shading calculation possible
  • single horizontal axis tracking
  • tracks sun azimuth
  • rotation limits possible
  • back-tracking possible
  • relative column spacing
  • self-shading calculation possible
  • single horizontal axis tracking
  • tracks sun elevation
  • rotation limits possible
  • back-tracking possible
  • relative row spacing
  • self-shading calculation not implemented
  • two axis tracking
  • tracks sun elevation and azimuth
  • rotation limits possible for both axis
  • back-tracking possible
  • relative column spacing
  • self-shading calculation not implemented


In case of WS API Time Series, trackers are theoretical, without rotation limits and backtracking.


Nofloatdegree00, 90 /dataDeliveryRequest/site/geometry/@tilt
azimuthNofloatdegree0, resp. 1800, 360True north-based azimuth (0=North, 90=East, 180=South, etc.). When this parameter is missing, defaults are following: if "lat" is less than 0 (southern hemisphere), azimuth defaults to 0, otherwise azimuth is 180 (northern hemisphere)./dataDeliveryRequest/site/geometry/@azimuth

PV System Related Parameters

PV required parameters are required in case of PV output data is requested. For requesting solar radiation and meteorological data only, PV parameters are not needed at all.

Parameter name in FTP APIRequiredValue typeValue unitDefault valueValue RangeDescriptionWS API Time Series equivalent (XPath)
pvInstalledPowerYesfloatkWp 0.1 - 100000Total installed power of the PV system in kilowatts-peak (kWp). The total PV system rating consists of a summation of the panel ratings measured in STC./dataDeliveryRequest/site/system/@installedPower
dateStartupNostring   String formatted as "yyyy-mm-dd" (example 2015-01-01). Start up date of PV system (resp. unpacking of modules). This parameter is used for calculation of degradation (or aging) of modules. If omitted, degradation is not taken into account./dataDeliveryRequest/site/system/@dateStartup
This property of the PV system helps to estimate how modules are ventilated. For sloped roof with PV modules on rails tilted at the same angle as the roof choose 'ROOF_MOUNTED' value. For PV modules incorporated into building facade choose 'BUILDING_INTEGRATED' value. This option is considered as the worst ventilated. As the best ventilated option is considered free standing installation. This typically means stand-alone installation on tilted racks anchored into the ground. Also choose this option if a PV system is installed on a flat roof (similar to stand-alone installation). The string value is in this case ''FREE_STANDING'./dataDeliveryRequest/site/system/@installationType
pvTrackerRotMinNostringpair of degrees-180,180
 Parameter is a pair of limiting rotation angles for OneAxisVertical, OneAxisInclined, OneAxisHorizontalNS and TwoAxisAstronomical (its vertical axis) mounting geometries. If the tracker is purely theoretical (no limits) the default value of "-180,180" is used. 
pvTrackerRotMin2Nostringpair of degrees-90,90
 Parameter is a pair of limiting tilt angles for TwoAxisAstronomical (its horizontal axis) and OneAxisHorizontalEW trackers. Because of technical realizations of variable tilt often a linear actuator is used. Inclination angle seldom varies beyond 0 to 90, more often, it has smaller range e.g. "10,80". If the tracker is purely theoretical (no limits) the default value of "-90 to 90" should be used. Selecting tilt limits of "45,45" turns OneAxisHorizontalEW tracker to the FixedOneAngle system with tilt of 45 degree and TwoAxisAstronomical tracker to the OneAxisVertical tracker. 
pvTrackerBackTrackNostring FALSETRUE or FALSEDefault value "FALSE" corresponds to a single axis tracker without neighbors (best possible) with specified rotation limits (pvTrackerRotMin or/and pvTrackerRot2Min). Implemented for all trackers. 
pvFieldSelfShadingNostring FALSETRUE or FALSEThe parameter affects FixedOneAngle geometry, then OneAxisHorizontalNS and OneAxisInclined type of trackers with pvTrackerBackTrack=FALSE. When pvTrackerBackTrack=TRUE, the parameter does not make sense as self-shading is avoided. No other options are implemented. It is used to determine the impact of self (inter-row) shading on PV power production. When set to TRUE, the effect of self-shading is taken into account in calculation, otherwise the geometry is assumed without neighbors (best possible). 
pvFieldColumnSpacingRelativeNofloat no spacing = isolated module
 The parameter has effect only in case of tracking system when pvTrackerBackTrack is TRUE. It specifies the ratio between distance between the equivalent trackers legs (axis) and PV collector width. Affected are trackers TwoAxisAstronomical, OneAxisVertical, OneAxisInclined, OneAxisHorizontalNS. 
pvFieldRowSpacingRelativeNofloat no spacing = isolated module
In case of trackers the parameter has effect only when pvTrackerBackTrack is True. It specifies the ratio between distance of the equivalent trackers legs (axis) and PV collector width. Affected are trackers TwoAxisAstronomical and OneAxisHorizontalEW. Moreover, it affects FixedOneAngle system together with the parameter pvFieldSelfShading set to TRUE (self-shading impact is then included in calculation)./dataDeliveryRequest/site/system/topology/@relativeSpacing
pvFieldTerrainSlopeNofloatdegree00, 90Slope of terrain, applied only when calculating self-shading effect of PV system with FixedOneAngle geometry. Defined in the same way as the parameter "tilt"./dataDeliveryRequest/site/terrain/@tilt
pvFieldTerrainAzimuthNofloatdegree1800,360Azimuth of sloped terrain, applied only when calculating self-shading effect of PV system with FixedOneAngle geometry. Defined in the same way as the parameter "azimuth"./dataDeliveryRequest/site/terrain/@azimuth
  • PROPORTIONAL for all other module technologies

This parameter estimates a loss of PV system output when modules are self-shaded. The effect depends on wiring interconnection within a module. Shading influence ranges from 0% (no influence) to 100% (full influence) and is mapped to categories:


When parameter is missing at all, the self-shading influence is estimated to 5 %.

  • CSI
  • ASI
  • CDTE
  • CIS
Enumerated codes for materials used in PV modules. Use 'CSI' for crystalline silicon, 'ASI' for amorphous silicon, 'CDTE' for cadmium telluride, 'CIS' for copper indium selenide./dataDeliveryRequest/site/system/module/@type
pvModuleDegradationNofloatpercent0.50, 100Estimated annual degradation of rated output power of PV modules. This parameter is only considered if "dateStartup" parameter is set./dataDeliveryRequest/site/system/module/degradation
pvModuleDegradationFirstYearNofloatpercent0.80, 100Estimated annual degradation of rated output power of PV modules in the first year of operation. If this parameter is not set, but "pvModuleDegradation" is present, the value of "pvModuleDegradation" will be used, otherwise default value 0.8% is considered. This parameter is only considered if "dateStartup" parameter is set./dataDeliveryRequest/site/system/module/degradationFirstYear
pvModuleSurfaceReflectanceNofloat 0.160, 1Empirical dimensionless coefficient, which is used to estimate PV power loss due to angular reflectivity of PV module surface. This parameter includes not only optical properties of covering glass, but also glass coating and dirt. Typical values for commercially available PV modules are 0.16 - 0.17 for clean surfaces, 0.20 for moderate dirty and 0.27 for dirty surface./dataDeliveryRequest/site/system/module/surfaceReflectance
pvModuleTempNOCTNofloatdegree Celsius

according to "pvModuleTechnology":

  • CSI=46°C
  • ASI=44°C
  • CDTE=45°C
  • CIS=47°C
 Normal operating cell temperature. Float value of the temperature in degrees Celsius of a free standing PV module exposed to irradiance of 800 W/m2 and ambient air temperature of 20°C and wind speed is 1 m/s. The value is given by manufacturer and only for ventilated free standing PV system./dataDeliveryRequest/site/system/module/nominalOperatingCellTemp
pvModuleTempCoeffPmaxNofloatpercent per degree Celsius

according to "pvModuleTechnology":

  • CSI=-0.438%/°C
  • ASI=-0.18%/°C
  • CDTE=-0.297%/°C
  • CIS=-0.36%/°C
 Negative percent float value representing the change in PV panel output power for temperatures other than 25°C (decrease of output power with raising temperature). This property is given at STC by manufacturer./dataDeliveryRequest/site/system/module/PmaxCoeff
pvInverterEffConstantNofloatpercent97.50, 100Value of inverter's efficency known as Euro or CEC (California Energy Commission) efficiency. This value is a calculated weighted efficiency given by manufacturer. It gives a simplified picture about an inverter, in fact non-linear performance. Valid range of this value is practically 70%-100%. For better results, it is recommended to provide inverter efficiency curve (by using parameter "")./dataDeliveryRequest/site/system/inverter/efficiency/@percent
pvInverterEffCurveDataPairsNostringkW/percent pairs  Efficiency of inverter is of non-linear nature, so it can be described as simplified curve defined as list of data points. Data point on the curve is defined by coordinates, where the x coordinate is absolute float value of input power in kilowatts (kW) and y coordinate is percent float value of the corresponding inverter's efficiency (%). This parameter accepts string value of this pattern: 'x1:y1 x2:y2 x3:y3 xn:yn'. A dot should be used as decimal separator, white space as a point delimiter and colon as x:y delimiter. We assume the last point determines the maximum input power of the inverter (with corresponding efficiency). Example efficiency curve of an inverter with the maximum input power of 3 kW is '0:85.6 0.5:96.2 1:98 1.5:97 2:97 2.5:96 3.0:96'. It is assumed, that one efficiency curve is valid for all inverters of the PV system (their powers are summed)./dataDeliveryRequest/site/system/inverter/efficiency/@dataPairs
pvLossesDCOtherNofloatpercent5.40, 100Estimated integration of specific other DC losses (see pvLossesDCMismatch, pvLossesDCCables and pvLossesDCPollutionSnow parameters) into one number. Maximum simplification for DC losses./dataDeliveryRequest/site/system/losses/@dc
pvLossesDCMismatchNofloatpercent1.00, 100Share of estimated mismatch losses within the value of pvLossesDCOther parameter./dataDeliveryRequest/site/system/losses/dcLosses/@mismatch
pvLossesDCCablesNofloatpercent2.00, 100Share of estimated cabling losses within the value of pvLossesDCOther parameter./dataDeliveryRequest/site/system/losses/dcLosses/@cables
pvLossesDCPollutionSnowMonthNostringformatted list of float percent  Distribution of the pvLossesDCPollutionSnow value into 12 average months. Example: "5.0,2.0,2.0,2.0,0.0,0.0,0.0,0.0,0.0,2.0,5.0,8.0". Value of the parameter must consist of 12 percent float values delimited with comma. If this parameter has a value, it takes precedence over pvLossesDCPollutionSnow parameter./dataDeliveryRequest/site/system/losses/dcLosses/@monthlySnowPollution
pvLossesDCPollutionSnowNofloatpercent2.50, 100Share of estimated dirt and snow losses within the value of pvLossesDCOther parameter./dataDeliveryRequest/site/system/losses/dcLosses/@snowPollution
pvLossesACNofloatpercent1.50, 100Estimated integration of specific AC losses (see pvLossesACCable and pvLossesACTransformer parameters) into one number. Maximum simplification for AC losses./dataDeliveryRequest/site/system/losses/@ac
pvLossesACCableNofloatpercent0.50, 100Share of estimated cabling losses within the value of pvLossesAC parameter./dataDeliveryRequest/site/system/losses/acLosses/@cables
pvLossesACTransformerNofloatpercent1.00, 100Share of estimated transformer losses within the value of pvLossesAC parameter./dataDeliveryRequest/site/system/losses/acLosses/@transformer

Parameters Controlling Request Processing

Parameter name in FTP APIRequiredValue typeValue unitDefault valueValue RangeDescriptionWS API Time Series equivalent (XPath)
siteIdYesstring   Unique identification of one request (one row in CSV request). example: "DETROIT_roof_1"/dataDeliveryRequest/site/@id
fromDateNostring   String formatted as "yyyy-mm-dd" (example "2015-01-01"). Date is assumed in UTC. Only required when requesting historical data by occasionally processed request. For regularly processed requests, avoid of using it (automated process will resolve it). Actual values differ according to data availability, see the coverage map. /dataDeliveryRequest/@dateFrom
toDateNostring   String formatted as "yyyy-mm-dd" (example "2015-01-01"). Date is assumed in UTC. Only required when requesting historical data by occasionally processed request. For regularly processed requests, avoid of using it (process will resolve it according your contract). Required when requesting historic data. The value should not exceed the date of TODAY-1 (yesterday), but actual possible value differs according to data availability, see the coverage map.  /dataDeliveryRequest/@dateTo
forecastFromDayYes (if forecast is needed)integer   In case of FTP API, forecast processing is indicated by file name of the CSV request file. Then this parameters are taken into account. 
forecastToDayYes (if forecast is needed)integer   In case of FTP API, forecast processing is indicated by file name of the CSV request file. Then this parameters are taken into account. 
  •  min15
  • min30
  • hourly
  • daily
  • monthly
  •  yearly
This parameter defines time resolution of output data. Original satellite and meteorological data are in various time steps (e.g. MSG satellite: 15 min, GOES-EAST satellite: 30 min, GFS weather model: 3 hour). When finer summarization is requested, the data will be interpolated into desired time step. In other words, you can request time resolution of 10 minutes even if the original dataset is not available in such resolution. The "monthly-longterm" summarization means 12 long-term monthly averaged entries + 1 annual entry i the response./dataDeliveryRequest/processing/@summarization
  • GHI
  • DNI
  • DIF
  • GTI
  • SE
  • SA
  • TEMP
  • AP
  • RH
  • WS
  • WD

The white-space-separated list of variable codes which will be included in the response (example: "GHI DIF TEMP WS WD"):

  • GHI: Global horizontal radiation, (W/m2 for instantaneous values, Wh/m2 for hourly values, kWh/m2  for daily, monthly and yearly values).
  • DNI: Direct normal radiation, (W/m2 for instantaneous values, Wh/m2 for hourly values, kWh/m2  for daily, monthly and yearly values).
  • DIF: Diffuse horizontal radiation, (W/m2 for instantaneous values, Wh/m2 for hourly values, kWh/m2  for daily, monthly and yearly values).
  • GTI: Global tilted radiation, (W/m2 for instantaneous values, Wh/m2 for hourly values, kWh/m2  for daily, monthly and yearly values). Consider setting up the "geometry", "azimuth" and "tilt" parameters, otherwise default will be horizontal surface.
  • SE: Sun altitude (elevation) angle (degrees).
  • SA:  Sun azimuth angle (degrees).
  • TEMP: Air temperature at 2 m (degrees Celsius).
  • AP: Atmospheric pressure (hPa).
  • RH: Relative humidity (%).
  • WS:  Wind speed at 10 m (m/s)
  • WD: Wind direction (degrees), true north-based azimuth. Do not request this variable in time steps above "hourly".
  • PVOUT: Output from PV system (kW for instantaneous, otherwise kWh). Consider setting up "geometry" and related parameters and required PV-related parameters.
timeZoneNoint 0 (=UTC+0)-12, 12Signed integer. Time zone with hourly precision. Value defines the time zone of output data and it is used for all summarizations. For daily and monthly summarization, the time zone it is activated automatically in the background. This is important for summarization of whole days, otherwise daily summary in UTC+0 would for Japan or Hawaii end up in putting together data from two different local days. For hourly and shorter time steps time zone must be specified, otherwise UTC+0 is used. All the satellite model results are calculated and internally stored in UTC+0. Therefore depending on the requested time zone value, the data reader automatically extends period from which data are read to acquire completed local day. For example, one whole day D (0-24h) in the time zone of UTC-5 will be read from UTC database as D (5-24 hours) and D+1(0-5 hours)./dataDeliveryRequest/processing/timeZone
timeStampTypeNostring CENTER
  • END
The parameter can be used in hourly or even in sub-hourly time steps when averaging of more values occurred within time interval. Example: let's say the value is the result of averaging of more occurrences within hourly interval from 15:00 to 16:00. If the value of the parameter is "CENTER", the value is time-stamped at 15:30, in case of "END" at 16:00 and finally "START" at 15:00./dataDeliveryRequest/processing/timeStampType
satelliteTimeStampNostring TRUETRUE or FALSEThis parameter is used to preserve time stamp of satellite data acquisition. The data for given position are recorded by satellite in exact moment given by scanning speed of the instrument. For example MSG data scan starts nearby south pole at time T and data for Europe are recorded with 10-13 minutes delay from nominal (start) scan time. To present the original satellite information and avoid degradation of the information content by temporal interpolation it is good to preserve local time stamp of satellite data acquisition. 
terrainShadingNostring FALSETRUE or FALSEApply or not terrain (or horizon) shading (whether default SRTM terrain or local horizon passed by user)./dataDeliveryRequest/processing/@terrainShading
userHorizonNostring   Formatted string describing custom local horizon. The horizon can be in any resolution, it will be interpolated internally. Example (sun azimuth:sun elevation pairs): 0:16.2,0.5:16.2,1:16,1.5:16,2:16,2.5:16,3:15.8,...358.5:16,359:16.2. Azimuth is true north-based (North=0 degree)./dataDeliveryRequest/site/horizon
activeNostring TRUETRUE or FALSEUser can toggle if particular request (=site, =row in CSV request file) should be processed or not. 

Request Examples


Data request CSV file must have header with parameter names on a first row. Below header, there can be unlimited number of rows with parameter values (site requests). Order of parameters is optional.

Regular data request example

Note, there are no "fromDate" and "toDate" parameters. Date period is resolved according to contract and managed by the automated process.

PV_plant_example48.6125920.82707920OneAxisHorizontalNS00hourlyTRUEGHI GTI DIF TEMP PVOUTCSIFREE_STANDING4002098.445-0.453.520.,450.545TRUEUNPROPORTIONAL_1TRUE

On-time data request example

Parameters "fromDate" and "toDate" are required in this case. Such request is processed only once. Note, only radiation and temperature is requested here, no PV system settings are needed. 

Variant_448.6125920.82707920 FixedOneAngle18020min15FALSEGHI GTI DIF TEMP2012060120121130TRUE0TRUECENTER

Forecast data request example

Note usage of "forecastFromDay" and "forecastToDay" parameters. Typically data will processed each 12 hours with forecasting from today (forecastFromDay=0) up to 7 days ahead (forecastToDay=7).

148.61259117.346977FixedOneAngle031hourly07TRUEGHI GTI TEMP PVOUTCSIFREE_STANDING10097.345-0.453.520.810.50.50.8201505211.731.73FALSE1180TRUEUNPROPORTIONAL_1TRUE300002START

Minimalist PV data request example

Note, degradation is not considered (missing "dateStartup" parameter).

PV_plant_example48.6125917.65040220FixedOneAngle1800hourlyGHI GTI DIF TEMP PVOUTCSIFREE_STANDING100TRUE

Minimalist solar radiation data request example

MySite148.6125917.65040220hourlyGHI DIF TEMPTRUE

WS API Time Series

There are no regularly processed request in case of this standard synchronous web service. Instead the client posts the request, waits for response and handles it. For technicalities visit this link. User can play with various requests directly from browser by using e.g. REST Client for Firefox. Set HTTP Method to "POST", endpoint URL to: and also set header "Content-Type: application/xml". Then post the examples below in the body of the request and explore responses. Note, there is a limit of max. 31 days within requested date period.

Data request example

Setting "dateFrom" and "dateTo" is required in all cases. User can control time zone for output data in two ways. Either by using "timeZone" element or by the "dateFrom" and "dateTo" attributes of "dataDeliveryRequest" element. The "timeZone" element takes precedence over "dateFrom" and "dateTo" attributes.

<ws:dataDeliveryRequest dateFrom="2014-04-28+01:00" dateTo="2014-04-28+01:00"
    <site id="site1dummy" lat="48.61259" lng="20.827079">
        <geo:terrain elevation="111" azimuth="112" tilt="11"/>
        <geo:horizon>0:5 7.5:3 15:7 22.5:0</geo:horizon>
        <pv:geometry xsi:type="pv:GeometryFixedOneAngle" azimuth="165" tilt="22"/>
        <pv:system installedPower="100" installationType="FREE_STANDING" dateStartup="2011-06-01">
            <pv:module type="CSI">
                <pv:powerTolerance low="3" high="3"/>
                <pv:efficiency xsi:type="pv:EfficiencyConstant" percent="94"/>
                <pv:acLosses cables="1" transformer="2.1"/>
                <pv:dcLosses cables="1.2" mismatch="0.65" monthlySnowPollution="4 2 3 4 5 7 8 4 7 4 5 1"/>
            <pv:topology xsi:type="pv:TopologySimple" relativeSpacing="2.5"/>
    <processing key="GHI DIF DNI PVOUT" summarization="HOURLY" terrainShading="true">

Forecast data request example

There is no difference between historical an forecast data request. Note, there are no "forecastFromDay" and "forecastToDay" parameters as with FTP API. Instead, user have to explicitly set the date period needed to be forecast-ed (max. 7 days ahead). Following request will give 8 days forecast-ed in total. The request below also shows minimalist settings needed for getting PV production (note that "inverter" and "losses" elements must be present even if they are empty) .

<ws:dataDeliveryRequest dateFrom="2015-11-13+01:00" dateTo="2015-11-20+01:00"
    <site id="site1dummy" lat="48.61259" lng="20.827079">
        <pv:geometry xsi:type="pv:GeometryFixedOneAngle" azimuth="165" tilt="22"/>
        <pv:system installedPower="100" installationType="FREE_STANDING" dateStartup="2011-06-01">
            <pv:module type="CSI"/>
    <processing key="GHI DIF DNI PVOUT" summarization="HOURLY">

Minimalist solar data request example

<ws:dataDeliveryRequest dateFrom="2015-02-15" dateTo="2015-02-15"
    <site id="site1" lat="48.61259" lng="20.827079"/>
    <processing key="GHI DIF DNI" summarization="MIN_15"/>


Response Examples

FTP API response

Responses from this service are standard SolarGIS CSV format files with header, metadata and data sections.They are suitable for automated processing. Examples of CSV response files: 

WS API Time Series response

Content of metadata element match with the metadata used in SolarGIS CSV format file.

<site id="site1dummy" lat="48.61259" lng="20.827079">
#Issued: 2015-11-13 15:06
#Site name: Firstsite
#Latitude: 48.612590
#Longitude: 20.827079
#Elevation: 111.0 m a.s.l.
#Output from the climate database SolarGIS v2.0.8
#Solar radiation data
#Description: data calculated from Meteosat MSG satellite data ((c) 2015
 EUMETSAT) and from atmospheric data ((c) 2015 ECMWF and NOAA) by 
SolarGIS method 
#Summarization type: hourly
#Summarization period: 28/04/2014 - 28/04/2014
#Spatial resolution: 250 m
#Service provider: GeoModel Solar s.r.o., M. Marecka 3, Bratislava, 
#Company ID: 45 354 766, VAT Number: SK2022962766
#Registration: Business register, District Court Bratislava I, Section 
Sro, File 62765/B
#Considering the nature of climate fluctuations, interannual and 
long-term changes, as well as the uncertainty of measurements and 
calculations, GeoModel Solar s.r.o. cannot take full guarantee of the 
accuracy of estimates. The maximum possible has been done for the 
assessment of climate conditions based on the best available data, 
software and knowledge. GeoModel Solar s.r.o. shall not be liable for 
any direct, incidental, consequential, indirect or punitive damages 
arising or alleged to have arisen out of use of the provided data. 
SolarGIS is a trade mark of GeoModel Solar s.r.o.
#Copyright (c) 2015 GeoModel Solar s.r.o.
#Date - Date of measurement, format DD.MM.YYYY
#Time - Time of measurement, time reference UTC+1, time step 60 min, 
time format HH:MM, end of the averaging interval
#GHI - Global horizontal irradiation [Wh/m2], no data value -9
#DIF - Diffuse horizontal irradiation [Wh/m2], no data value -9
#DNI - Direct normal irradiation [Wh/m2], no data value -9
#PVOUT - PV output [kWh]
<columns>GHI DIF DNI PVOUT</columns>
<row dateTime="2014-04-28T01:00:00.000+01:00" values="0.0 0.0 0.0 0.0"/>
<row dateTime="2014-04-28T02:00:00.000+01:00" values="0.0 0.0 0.0 0.0"/>
<row dateTime="2014-04-28T03:00:00.000+01:00" values="0.0 0.0 0.0 0.0"/>
<row dateTime="2014-04-28T04:00:00.000+01:00" values="0.0 0.0 0.0 0.0"/>
<row dateTime="2014-04-28T05:00:00.000+01:00" values="12.0 10.0 24.0 0.362"/>
<row dateTime="2014-04-28T06:00:00.000+01:00" values="123.0 61.0 314.0 7.642"/>
<row dateTime="2014-04-28T07:00:00.000+01:00" values="288.0 108.0 512.0 22.836"/>
<row dateTime="2014-04-28T08:00:00.000+01:00" values="472.0 128.0 682.0 39.531"/>
<row dateTime="2014-04-28T09:00:00.000+01:00" values="623.0 146.0 752.0 51.373"/>
<row dateTime="2014-04-28T10:00:00.000+01:00" values="710.0 200.0 694.0 56.572"/>
<row dateTime="2014-04-28T11:00:00.000+01:00" values="734.0 244.0 613.0 56.909"/>
<row dateTime="2014-04-28T12:00:00.000+01:00" values="454.0 283.0 208.0 33.365"/>
<row dateTime="2014-04-28T13:00:00.000+01:00" values="466.0 266.0 253.0 32.947"/>
<row dateTime="2014-04-28T14:00:00.000+01:00" values="677.0 248.0 578.0 48.315"/>
<row dateTime="2014-04-28T15:00:00.000+01:00" values="365.0 231.0 204.0 24.423"/>
<row dateTime="2014-04-28T16:00:00.000+01:00" values="462.0 170.0 579.0 28.702"/>
<row dateTime="2014-04-28T17:00:00.000+01:00" values="296.0 110.0 530.0 13.76"/>
<row dateTime="2014-04-28T18:00:00.000+01:00" values="120.0 61.0 269.0 3.287"/>
<row dateTime="2014-04-28T19:00:00.000+01:00" values="6.0 6.0 4.0 0.08"/>
<row dateTime="2014-04-28T20:00:00.000+01:00" values="0.0 0.0 0.0 0.0"/>
<row dateTime="2014-04-28T21:00:00.000+01:00" values="0.0 0.0 0.0 0.0"/>
<row dateTime="2014-04-28T22:00:00.000+01:00" values="0.0 0.0 0.0 0.0"/>
<row dateTime="2014-04-28T23:00:00.000+01:00" values="0.0 0.0 0.0 0.0"/>
<row dateTime="2014-04-29T00:00:00.000+01:00" values="0.0 0.0 0.0 0.0"/>
  • No labels